committed to becoming the leading labeling machine and automatic intellgent packing solution supplier in China.
|Place of Origin:||China|
|Certification:||ISO9001:2015, CE. SGS|
|Minimum Order Quantity:||1|
|Packaging Details:||Wooden Boxs|
|Delivery Time:||20-25 work days|
|Payment Terms:||Western Union, T/T, MoneyGram|
|Supply Ability:||15 Set per Month|
|Label Size:||Length:6-250mm Width:20-160mm||Business Type:||Supplier, Factory, Manufacture|
|Material:||Stainless Steel||Label Speed:||40-150pcs/min|
|Driven Type::||Electric||Automatic Grade::||Automatic|
Automatic Labeling Machine For Paper Scratch Card / T-Shirt Labeling Machine
HL-T-300 Automatic card labeling machine be exclusively used in all kinds of cards labeling and all kinds of plastic surface sheets,protection film Labeling,
High precision, no bubble film; have the automatic identification function is enabled automatically according to the different products with different label head work.
Core working principle:The sensor detects the signal to return products after labeling control system, signal processed by PLC, posted at the appropriate time send label attached to the product
set position, products covered through the calibration device, label coated firmly, a label attached to complete action
|Applicable Labe Size||Length||6mm-250mm|
|Machine Size(LxWxH)||About 1600mm x 780mm x 1400mm|
|Delivery Time||10-15 Days|
|Shipping Method||Sea.Air and Express|
|Payment Term||L/C,T/T,Money Graml etc
Characteristics of Function:
1. Labor measurement GS-63 electric sensor (Figure 1) adjustment:
principle Description: According to the different thickness to identify the gap between the labels. (It’s identified by the fact that light penetrates the non-labeled area and the non-penetrated labeled area.)
2. Electric sensor use method:
1) Pass the label through the electric eye U-groove, as show below.
2) If the label is pulled, the yellow signal light will light up in the interval between the label and the label, it will go out when there is label, then it will be normal and can be used directly.
3) When the yellow signal light is always on or off , the electric sensor need to reset.
3. Electric sensor setting as follows:
1) Pass the label through the electric eye U socket, as show below.
2) Put the labeled place in the U socket of the electric eye and press and hold the adjustment button for 3 seconds until the yellow light blinking, then release the button. Put the No-lable gap (only backing paper) into the U-groove and hold the adjusting button for 8 seconds then release the button to achieve the setting.
3) Pull the label in the sensor U socket, on the place of label the yellow light is off . Then the yellow light is on at the gap between labels.